Setup - NEC N8403-034 User Manual

4. Setup

Please follow the steps described below to set up this product.
Explained in
the User's Guide
Explained in the
"N8403-034 Setup Card" for
Fibre Channel Driver,
Install the card
Install this product in the CPU Blade.
Label WWPN address
Label WWPN address on the Blade management sheet.
Install the CPU Blade
Install the CPU Blade in the Blade Enclosure.
Install the driver
Install the driver for your operating system.
->
See "N8403-034 Setup Card"
- 35 -
-> Page 31
-> Page 32
-> page 32