Table of Contents
Advertisement
When switching on the receiver from standby, sound will be
produced at the volume level last set.
>
The volume of your receiver can be increased by
using the
using the
>
Press the
press the key again to switch the sound back on.
6.4 Selecting a different language
Where a programme is broadcast in several languages, or
with several sound channels (
you can select a different language or sound channel as fol-
lows:
>
Press the key
list of the currently broadcast languages will be dis-
played on screen. (Fig. 6-6)
>
Use the
language.
>
Confirm by pressing
You can now listen to the programme in the language
selected. Your receiver is also able to receive mono
broadcasts (
in the information box). (Fig. 6-7)
6.5 TV/Radio switching
The pre-programming includes radio programmes as well as
television programmes. In Radio mode, the accompanying
TV picture is switched off, and only the programme name is
displayed on screen.
>
Switch the receiver into Radio mode by pressing the
key.
The receiver will now switch to the radio programme
last selected.
>
Press the
programme most recently selected.
6.6 Return to last programme selected
>
Press the
the previous programme selected.
>
Press the key again to return to the programme
viewed before.
key, or you can make it softer by
key.
key to mute the sound,
in the information box),
to select the desired
.
key again to switch to the TV
key on the remote control to return to
. If available, a
19
(Fig. 6-6)
(Fig. 6-7)
Advertisement
Table of Contents
