Table of Contents
Advertisement
7.3 Cancelling parental control for individual
programmes
In order to delete the parental control block for individual pro-
grammes, proceed as per Point 7.1.5. First press the
function key (Change), then enter the PIN code. Select the
appropriate programme and use the
(Parental Control) to remove the access control.
7.4 Programme search
There are various methods of proceeding with a programme
search, which will allow you to receive new programmes.
Select this type of search in order to scan the entire frequen-
cy range of the receiver for programmes.
Select this type of search to scan only a specific range of fre-
quencies or channels for programmes.
Select this type of search to scan a specific frequency for
programmes.
When the search has been completed, your screen will dis-
play a message showing how many programmes have been
found by your receiver, and how many of these are new. New
programmes are stored in the
to the
>
To perform a programme search first call up the
. (Fig. 7-5)
>
Use the
>
Confirm by pressing
be displayed (Fig. 7-6)
>
Now use the
type of search method you wish to perform.
7.4.1 Automatic Search
>
A message will be displayed, confirm this by pressing
. The entire input frequency range will now be
scanned for programmes. Please note any further
messages that are displayed on screen.
It may take more than 15 minutes to complete the
search.
>
You can terminate the search by pressing the
function key.
and can be added
as per
.
dto highlight the line
. The sub-menu
function key
will
to select the
29
(Fig. 7-5)
(Fig. 7-6)
Advertisement
Table of Contents
