Questions And Answers - Siemens Gigiaset SL37H Manual

Questions and answers

If you have any questions about using your
handset, visit us at any time at
www.gigaset.com/service. The table below
contains a list of common problems and
possible solutions.
Registration or connection problems with a
Bluetooth headset.
¥
Reset the Bluetooth headset (see the user
¥
guide for your headset).
Delete registration data from the handset
¢
when de-registering the device
¥
( S. 27).
¢
Repeat the registration process
( S. 26).
The display is blank.
¥
1. The handset is not switched on.
Press and hold the end call key
¥
2. The battery pack is flat.
Charge/replace the battery pack (
The keys of a handset do not respond when
pressed.
The keypad lock is activated. ¥
Press and hold the hash key
"Base station x" flashes on the display.
1. The handset is outside the range of the base
station. ¥
Move the handset closer to the base sta-
tion.
¥
2. The handset has been de-registered.
Register the handset (
¥
3. The base station is not switched on.
Check the base station mains adapter.
a
.
¢
S. 6).
¢
#
( S. 8).
¢
S. 7).
Base Search flashes in the display.
The handset is set to Best Base and no base sta-
¥
tion is switched on or within range.
¥
Move the handset closer to the base station.
Check the base station mains adapter.
Handset does not ring.
¥
The ringer tone is switched off.
Activate the ringer tone (
The other party cannot hear you.
u
You have pressed the
¥
is "muted".
Switch on the microphone again (
You hear an error tone when keying an input
(a descending tone sequence).
¥
Action has failed/invalid input.
Repeat the operation.
Watch the display and refer to the user guide if
necessary.
¢
S. 22).
(INT) key. The handset
¢
S. 11).
29