Questions And Answers - Siemens Gigaset S67H Manual

Appendix

Questions and answers

If you have any questions about using
your handset, visit us at any time at
www.gigaset.com/customercare. The
table below contains a list of common
problems and possible solutions.
The display is blank.
1. The handset is not turned on.
¥
Press and hold the end call key
2. The battery is flat.
¥
Charge or replace the batteries (page 6).
The keys of a handset do not respond when
pressed.
The keypad lock is activated.
¥
Press and hold the hash key
"Base station x" flashes on the display.
1. The handset is outside the range of the
base station.
¥
Move the handset closer to the base
station.
2. The handset has been deregistered.
¥
Register the handset (page 7).
3. The base station is not turned on.
¥
Check the base station mains adapter.
Base Search flashes in the display.
The handset is set to Best Base
station is turned on or within range.
¥
Move the handset closer to the base
station.
¥
Check the base station mains adapter.
Handset does not ring.
The ringer tone is deactivated.
¥
Activate the ringer tone (page 21).
The other party cannot hear you.
You have pressed the
set is "muted".
¥
Switch on the microphone again (page 12).
You hear an error tone when keying an
input (a descending tone sequence).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the user
guide if necessary.
26
a
.
#
(page 9).
and no base
u
(INT) key. The hand-