Ending A Call; Accepting A Call; Handsfree Talking; Muting - Siemens Gigiaset SL37H Manual

Ending a call

a
Press the end call key.

Accepting a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree key
d.
You can accept the call by:
¤
Pressing the talk key c.
¤
Pressing the handsfree key d.
If the handset is in the charging cradle and
the Auto Answer function is activated
¢
( S. 21), the handset will take a call auto-
matically when you lift it out of the cradle.
If the ringer tone is intrusive, press the
§Silence§
display key. You can take the call as
long as it is displayed on the screen.
Accepting a call on a Bluetooth
headset
Precondition: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the handset
¢
( S. 26).
Only press the talk key on the headset when
the headset itself rings; it may take up to 5
seconds to establish a connection to the
handset.
For further details on your headset, see the
user guide issued with it.

Handsfree talking

In handsfree mode, instead of holding the
handset to your ear you can put it down, for
example on the table in front of you, to allow
others to participate in the call.
Activating/deactivating handsfree
mode
Activating while dialling
~ d
Enter the number and press the
handsfree key.
¤
You should inform your caller before you
use the handsfree function so that they
know someone else is listening.
Switching between earpiece and
handsfree mode
d
Press the handsfree key.
Switch handsfree on or off during a call.
If you wish to place the handset in the char-
ging cradle during a call:
¤
Press and hold the handsfree key d
while placing the handset in the base sta-
tion. If the handsfree key d does not
light up, press the key again.
For how to adjust the handsfree volume
¢
S. 21.

Muting

You can deactivate the microphone in your
handset during an external call. The other
party hears hold music.
u
Press the control key on the left
to mute the handset.
"
Press the display key to reacti-
vate the microphone.
11