Configuring The Vlt 5000 With Rs Networx - Danfoss VLT 5000 Application Note

Configuring the VLT 5000 with RS Networx

In this example we will only have one VLT 5000 set
up to address 4 and the Master (1756-DNB) set up
to address 0.
Start RS Networx and a new project.
First install the EDS file by using the EDS wizard
under TOOLS and IMPORT EDS FILE. The file can
be ordered from your local Danfoss sales company.
4
VLT ® 5000 DeviceNet and Allen Bradley Control logix 5550
After you have powered up the system and
browsed for active nodes on the DeviceNet you
map the I/O area of the VLT 5000 DeviceNet card
to the 1756 DeviceNet Scanner.
MN.51.T1.02 - VLT is a registered Danfoss trademark