Hach NA5600 sc Na+ Operations page 6

Display description
Figure 3 shows the top half of the measurement screen. The top half of the measurement screen
shows the status of the analyzer and the sodium concentration for one channel. To change the
channel shown, push the UP or DOWN arrow. To show more than one channel, push the RIGHT
arrow.
The background color of the display changes to show the status of the analyzer. Refer to
show the active errors, warnings and reminders, push diag and select DIAGNOSTICS.
Figure 4 shows the bottom half of the measurement screen. The bottom half of the measurement
screen shows the measurement quality, service status and solution levels.
Figure 3 Measurement screen—top
1 Sodium concentration
2
2 Channel name
3 Analyzer name
4 Home (measurement screen)
5 Channel being measured
2
For example, "1-SAMPLE1" is "Channel 1-SAMPLE1". SAMPLE1 is the default name for
Channel 1. Channels that contain the symbol "~" are not measured (e.g., 4-~SAMPLE4).
6 English
6 Activity (shown during a measurement or calibration
process)
7 Reminder (maintenance is due)
8 SD card (shown when a SD card is inserted)
9 Relays (active relays are white squares)
10 Parameter measured (Na
Table 1. To
+
= sodium)