Configuring Upnp On The Thomson Gateway - THOMSON TG585 v7 Setup And User Manual

5 Getting the Most Out of Your Thomson Gateway
5.1.3

Configuring UPnP on the Thomson Gateway

Introduction
On the Thomson Gateway Web Interface
Enable/Disable UPnP
Extended Security
Enable/Disable UPnP
Proceed as follows:
1 Browse to the
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enabled only limited UPnP operation between the host and the Thomson Gateway is
allowed:
A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You can
then only connect/disconnect the Internet connection via the
Address translation mappings can only be added or changed via UPnP for the host on which the UPnP
application is running.
Enabling Extended Security
Proceed as follows:
1 Browse to the
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.
34
you can:
Thomson Gateway Web Interface.
Thomson Gateway Web Interface.
Thomson Gateway Web Interface
E-DOC-CTC-20080118-0003 v3.0