Configuring Upnp On The Thomson Gateway - THOMSON TG585 V8 Setup And User Manual

4.1.3

Configuring UPnP on the Thomson Gateway

Introduction
On the Thomson Gateway GUI
Enable/Disable UPnP.
Enable/Disable Extended
Enable/Disable UPnP
Proceed as follows:
1 Browse to the Thomson Gateway
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enabled only limited UPnP operation between the host and the Thomson Gateway is
allowed:
A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You can
then only connect/disconnect the Internet connection via the
Address translation mappings can only be added or changed via UPnP for the host on which the UPnP
application is running.
Enable/Disable Extended Security
Proceed as follows:
1 Browse to the Thomson Gateway
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.
E-DOC-CTC-20090708-0001 v1.0
you can:
Security.
GUI.
GUI.
4 Thomson Gateway Tools
Thomson Gateway GUI
35