Configure The Thomson Gateway; Connect The Cables; Manual Installation - THOMSON TG585 v7 Setup And User Manual
Thomson wireless multi-user adsl2+ gateway setup and user guide
Hide thumbs
Also See for TG585 v7:
- Setup and user manual (60 pages) ,
- Setting up (4 pages) ,
- Reference manual (782 pages)
Table of Contents
Advertisement
1
Installation
1.2.2
Manual Installation
Procedure
Proceed as follows:
1
Connect the cables
2
Configure the Thomson Gateway
Connect the cables
Proceed as follows:
1
Connect your computer to the Thomson Gateway as described in
Network" on page
2
Connect the Thomson Gateway to the DSL line.
3
Connect the power supply.
4
Turn on the Thomson Gateway.
Configure the Thomson Gateway
1
Open your web browser.
2
The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.
If this window does not appear browse to
Gateway (by default: 192.168.1.254) and click Thomson Gateway on the menu on the left-hand side.
3
Click Setup my Thomson Gateway.
4
The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson
Gateway. Click Next and follow the instructions.
8
19.
http://dsldevice.lan
"3 Adding a New Computer to your
or to the IP address of your Thomson
E-DOC-CTC-20080118-0003 v3.0
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the TG585 v7 and is the answer not in the manual?
Questions and answers