Configuring Upnp On The Thomson Gateway - THOMSON TG790 Setup And User Manual

4 Getting the Most Out of Your Thomson Gateway
4.2.3

Configuring UPnP on the Thomson Gateway

Introduction
On the Thomson Gateway Web Interface
Enable/Disable UPnP
Extended Security
Enable/Disable UPnP
Proceed as follows:
1 Browse to the Thomson Gateway Web
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enable only limited UPnP operation between the host and the Thomson Gateway is
allowed. A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You
can then only connect/disconnect the Internet connection on the
Enabling Extended Security
Proceed as follows:
1 Browse to the Thomson Gateway Web
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.
E-DOC-CTC-20080118-0075 v1.0
you can:
Interface.
Thomson Gateway Web
Interface.
Interface.
41