Installing Upnp On Windows Xp - THOMSON TG585 v7 Setup And User Manual

5 Getting the Most Out of Your Thomson Gateway
5.1.4

Installing UPnP on Windows XP

Adding UPnP
If you are running Microsoft Windows XP, it is recommended to add the UPnP component to your system.
Proceed as follows:
1 In the Start menu, click (Settings >) Control Panel.
2 The Control Panel window appears.
Click Add or Remove Programs.
3 The Add or Remove Programs window appears.
Click Add/Remove Windows Components.
4 The Windows Components Wizard appears:
In the Components list, select Networking Services and click Details
5 The Networking Services window appears:
Select Universal Plug and Play or UPnP User Interface and click OK.
6 Click Next to start the installation and follow the instructions in the Windows Components Wizard.
7 At the end of the procedure the Wizard informs you that the installation was successful. Click Finish to
quit.
E-DOC-CTC-20080118-0003 v3.0
35