K3R072 Mimic Display Board; K3G060 Relay Board - Siemens AlgoRex CS1140 Comissioning Hardware

Operation and floor repeater display
11.4

K3R072 mimic display board

Item Component
1 Mounting plate
2 'N3' resistor array
3 'S1' programming switch: Device
address
11.5

K3G060 relay board

Item Component
1 Mounting plate
2 Bridges 'X1'.....'X24': Programming
external potential + or - to relay
contact
28
Building Technologies
Fire Safety
Preparation
Remove, fit according to system documentation, see
also description in document 001260
Remove from all but 1 device, also see description in
document 001260
Set in accordance with system documentation
1
N3
S1
Then refit board on mounting plate, connect data bus and supply cable as well

as peripherals.
Preparation
Remove, fit according to system documentation, see
also description in document 001260
Set according to system documentation, see also
description in document 001260
1
X1
X24
Then refit board on mounting plate, connect data bus as well as peripherals.

2
3
2
Default ex factory
Fitted
Equipped
Address 0 (test procedure)
Default ex factory
Fitted
'Open' (relay contact is potential-
free)
008726_e_en_--
06.2017