Programming A Recording - THOMSON DTH8005 Owner's Manual

2_DTH8005_en 9/03/04
Recording functions

Programming a recording

You can record a future programme by programming its recording time. For this you have the
choice of manual programming or Naviclick programming, explained on page 24. Open the DVD
tray by pressing the
tray using the
OPEN/CLOSE
1. From the main menu (
key or then confirm using the
• The Timers screen is displayed. It contains a list of all the deferred recordings that you
have already programmed, whether carried out manually, as explained below, or using the
Naviclick function explained on page 24. If nothing has been programmed the screen
simply displays Add Timer.
2. Press the
OK
• The programming menu is displayed.This menu allows you to define all the parameters
necessary for a deferred recording. Select each parameter with the
the corresponding information with the number keys or the
3.
Name
Give a Name to your programme. Press the
keys , ,
complete, select Keep Timer
4.
Channel
a) Enter the channel number using the digit keys of the remote control (Pr -- must be displayed)
or browse the list of channels in the memory of the DTH 8005 using the
b) Or select one of the Audio-Video (AV2,AV3,AV4) sockets to which is connected a device
(satellite receiver or other) using the
Note: selecting the AV2 connector allows you to program the recording of a satellite reciever programme
(either left switched on or also programmed) connected to this connector. The selecting of the AV2 connector
is activated by default by the AV Timer function (triggering of programming via the AV connector).
5.
Day (s)
Using the digit keys on the remote control type in the date, if the recording is not made the
same day, and / or select a period using the
Once: to record the selected programme according to the parameters you have defined.
Every Fri: to record the same programme the same day every week starting from today (supposing today
is Friday).
Mon-Fri: to record the same programme, everyday at the same time from Monday to Friday.
17:20 Page 22
key. Put in a disc with the printed side upwards. Close the
OPEN/CLOSE
or key.
PLAY
key or in Stop mode) select the Timers function with the
MENU
key.
OK
key.
Note: your DTH 8005 can memorise the parameters of 16
different programmings. In the case of double programming, a
warning message is displayed.
, and
OK to compose the title of the recording letter by letter.When
with and press OK.
key as described below.
INFO key to access the keyboard table. Use the
key (the socket details are shown on page 14).
key.
22
or key and enter
key.
PR+/PR-