ZALMAN TNN 300 User Manual page 27

6) Installing the Heatpipe VGA Cooler
TYPE
Block
ATI
NVIDIA
※ ※ Note
▶ If the VGA card interferes with certain components of the case, stop assembling and
replace the card with one that is recommended. (www.zalman.co.kr/product/TNN300.html)
▶ Zalman Tech is not responsible for any damages due to user negligence during the
CPU cooler removal or installation process.
▶ The bonding strength of the thermal tapes reaches 90% after 24 hours of curing.
▶ If you need to reattach the used RAM heatsinks, purchase thermal tapes separately to
ensure strong adhesion.
① Remove the stock VGA cooler on the VGA card and clean off the exposed contact surface
(VGA chipset and RAM) completely of particles using acetone or alcohol.
② Peel off the film from the thermal tape on the bottom of the RAM heatsinks and stick the
RAM heatsinks onto the VGA RAM chips.
VGA Chipset
VGA Block Base A
ATI Radeon Series
GeForce 4 Ti Series
GeForce 3 MX Series
VGA RAM
VGA Block Base B
GeForce 5900 Series
GeForce 6600 Series
Thermal Tape
Thermal Tape Film
RAM Heatsink
-
TNN 300