ZALMAN ZM-MFC2 User Manual
  1. Manuals
  2. Brands
  3. ZALMAN Manuals
  4. Computer Accessories
  5. ZM-MFC2
  6. User manual

ZALMAN ZM-MFC2 User Manual

Multi fan controller
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
2

Advertisement

Table of Contents
loading

Related Manuals for ZALMAN ZM-MFC2

Summary of Contents for ZALMAN ZM-MFC2

  • Page 2: Safety Precautions

    If the current to be measured exceeds 10A (RMS), Using the product for purposes not specified by use a cable or conductor that allows current greater ZALMAN may cause damage to other devices than the current to be measured to flow through it, connected to this product.
  • Page 3 3. One Bracket / CVS Extension Cable 4. Four Temperature Sensors 5. Fan Cables - 3-Pin 1EA, 4-Pin 1EA, Y-Cable 1EA, C3 Cable 1EA 6. Four ZM-MFC2 Installation Bolts 7. One Bracket Installation Bolts 8. One User’s Manual ZM-MFC2 Specifications...

  • Page 4: Front Panel

    Front Panel Graphic Power Load Meter: Displays power between 30 to 800W in 4 stages. Numeric Power Load Display: Numerically displays power between 30 and 800W. (The Numeric Power Load Display will read LLL when an overflow occurs. LLL indicates power loads beyond the unit s measurable range.) Fan Status Display: The Fan’s operation status is indicated with animated propeller images.

  • Page 5: Installation

    Installation 1. Turn the computer’s power OFF and unplug the 2. Install the ZM-MFC2 into a 5.25 ODD bay as shown Main Power Cord before installing ZM-MFC2. in the diagram. 3. Fix it in place with the use of Bolts.
  • Page 6 Connections The Main AC Power Cord is not provided with ZM-MFC2. The specifications of product may change without any prior notice to improve performance.
  • Page 7 C3 Cable The C3 Cable enables the motherboard to sense the RPM of the CPU fan or a case fan allowing the system to boot without errors. <How To Use > Caution : An error can occur if the fan RPM is set too low. In this case, deactivate the monitoring feature for the CPU fan in the BIOS.

  • Page 8: Operational Guidelines

    7. For fans with a specified minimum RPM, if the fan is set to a low RPM, there may be cases in which the fans stop and restart rotating. This is not a defect of ZM-MFC2. You must set the RPM higher than the specified minimum RPM of the fan.

  • Page 9: Contact Information

    Zalman’s CNPS (Computer Noise Prevention System) Products For a stable and noiseless system of the highest quality, use Zalman’s Ultra Quiet CPU Coolers, Ultra Quiet VGA Coolers, Ultra Quiet Power Supplies, Heatpipe HDD Cooler, Fanless Northbridge Coolers, and Noiseless Case Fans.

Table of Contents