Advertisement
Advertisement
Related Manuals for ZALMAN Z-MACHINE GT900
Summary of Contents for ZALMAN Z-MACHINE GT900
- Page 1 Z-MACHINE GT900 English version ◈ Please read this manual thoroughly before installation. ◈ Visit our website and view the Z-MACHINE GT900 installation video first to ease the installation process. E-mail: zalman@zalman.co.kr www.zalman.co.kr www.zalmanusa.com www.zalman.co.kr www.zalmanusa.com...
-
Page 2: Table Of Contents
Z-MACHINE GT900 ▣ Table of Contents 1. Safety Notices 2. Components 3. Specifications 4. Front Panel Buttons and I/O Ports 5. Installation Guide The specifications of any product may change without prior notice to improve performance. -
Page 3: Safety Notices
Disclaimer Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, and improper testing. -
Page 4: Components
Z-MACHINE GT900 Components (1) Z-MACHINE GT900 Main Chassis The specifications of any product may change without prior notice to improve performance. - Page 5 Z-MACHINE GT900 (2) Accessories D D i i a a g g r r a a m m P P a a r r t t N N a a m m e e S S p p e e c c i i f f i i c c a a t t i i o o n n Q Q t t y y...
-
Page 6: Specifications
Z-MACHINE GT900 Specifications E E n n c c l l o o s s u u r r e e T T y y p p e e Tower E E n n c c l l o o s s u u r r e e D D i i m m e e n n s s i i o o n n s s 480mm X 220mm X 450mm ( ( D D ×... -
Page 7: Front Panel Buttons And I/O Ports
Z-MACHINE GT900 Front Panel Buttons and I/O Ports ① ② ⑤ ③ ④ ① System Power Button ② System Power LED ③ System HDD Power LEDs (1~2) ④ System Reset Button ⑤ Audio (Headphones, MIC), USB 2.0, IEEE1394 Port The specifications of any product may change without prior notice to improve performance. -
Page 8: Installation Guide
Z-MACHINE GT900 Installation Guide (1) Enclosure Disassembly Unscrew the two Bolts (Bolt, FH M3x6) as shown in the diagram to open the Door. (2) Power Supply Installation Place the PSU on the Power Bracket, and screw the four Bolts (Bolt, PHM #6- 32*10 (Black)) from outside the enclosure. - Page 9 Z-MACHINE GT900 (3) Motherboard Installation Install the motherboard onto the enclosure. Now install the computer components (CPU, VGA, RAM, etc.) onto the motherboard. 참 고) To install a microATX motherboard, first install the 2 enclosed microATX Stand Offs to align the height with the ATX Stand Offs.
- Page 10 Z-MACHINE GT900 (4) 5.25 & 3.5 Drive Installation 1) Remove the Bay Covers of the 5.25 (ODD) and 3.5 (FDD) bays. 2) Fix the ODD / FDD in place with the use of Fixing Bolts (M3x5) on either sides of the ODD / FDD.
- Page 11 Z-MACHINE GT900 (5) Hard Disk Drive Installation 1) Basic Installation HDD Lock Bar Fixing Screw Hole HDD Lock Bar Fixing Screw ① Open (raise) the HDD Lock Bar of the HDD Chassis°Ø Bay where the HDD will be installed. ② Slide in the HDD into the Bay and close (lower) the HDD Lock Bar behind the HDD.
- Page 12 Z-MACHINE GT900 2) Locking Installation Note) For moving the assembled enclosure, please fix the HDD Locking Device into place as shown on the diagrams. ① ② Tool Free Fixing Screw Hole Tool Free Bolt Lock Groove Align the Lock Groove of the HDD Lock Bar with the Fixing Screw Hole.
- Page 13 Z-MACHINE GT900 (6) Cable Connection 1) Button PCB Connection ※ Improper connection of the Power LED and HDD LED can lead to LED malfunction. Please refer to the motherboard manual before making cable connections. The specifications of any product may change without prior notice to improve performance.
- Page 14 Z-MACHINE GT900 2) Front I/O Connections Note) ※ ※ Precautions for Cable Connections ▶ Please refer to the motherboard manual for connecting the USB 2.0, IEEE1394a, and audio connectors. ▶ Do not connect the USB2.0 connector to the IEEE1394a connector. It will cause serious damage to the product.