ZALMAN TNN 300 User Manual page 24

4) Installing the Heatpipe CPU Cooler
TYPE
Appropriate
Installation
Holes
Finger Bolts
To Use
※ ※ Note
▶ The CPU block and the heatpipes can be moved
to a certain extent to accommodate the position
of the CPU. If the CPU is positioned beyond the
installable area, stop assembling and replace the
motherboard with one that is recommended.
(www.zalman.co.kr/product/TNN300.html)
▶ Apply an even, generous quantity of thermal
grease (1mm or 0.04 inches in height) on the
CPU core, and install the CPU block base
(gold colored).
▶ Apply thermal grease on the grooves of the CPU
block base and the CPU case block base, where
the CPU heatpipes make contact.
▶ The CPU case block base already has thermal
grease coated underneath, so it should not be
taken off under any circumstances.
▶ Use a coin or a screwdriver to firmly tighten the CPU finger bolts.
TNN 300
Intel P4 Intel P4
Socket 478 Socket 775
(Inner Holes)
Socket 478
Socket 775
Finger Bolts
Finger Bolts
(M3x52) (M3x49)
AMD AMD64
Socket 754/939/940
(Outer Holes)
AMD64
Finger Bolts
(M3x40)