Installation Guide - ZALMAN TNN 300 User Manual

9

Installation Guide

1) Disassembling the TNN 300 Case and Components
① As shown in the diagram, lay the TNN 300 down on a flat surface and open the left plate.
② Install the door support bolt.
Left Plate
VGA Heatpipe
VGA Case Block Cover
Bolts (PH M3x15)
③ Separate the CPU case block cover and the six CPU heatpipes.
④ Remove the front heatsink and separate the three VGA heatpipes.
⑤ After removing the necessary blocks and heatpipes using a screwdriver, store them
in a safe place.
Bolts (PH M3x15)
CPU Case Block Cover
CPU Heatpipe
Hand Nut
Front Heatsink
TNN 300