ZALMAN TNN 300 User Manual page 30

⑦ Stick the thermal pad on the VGA block-H and install the front heatsink over it.
7) Installing the ODD/HDD
① Take off the ODD/HDD installation bracket and install the ODD/HDD onto the bracket.
② Install the bracket with the ODD/HDD on the side of the case.
8) Connecting the Power & Data Cables
① Check whether the power connector on the motherboard is a 24 pin or 20 pin type connector
and connect the appropriate Motherboard Power Cable.
② Connect the various power and data cables as needed.
TNN 300
Hand Nut
VGA Block-H
Front Heatsink
ODD (CDROM)
ODD Bracket
Bolt (PH M3X8)
HDD
HDD Damper
HDD Bracket
Bolt (PH #6-32X7)