Abus CITADEL Alarm Set Micral Fitting And Operating Instructions page 32

Available languages

3. Pull out the insulation sheet of the battery

4. Close the housing

Instructions for use / battery replacement

• After inserting the battery and pulling out the insulation film, the motion

detector starts a 60-second self-test. During this time the LED flashes.

Detector sends a signal to the alarm central to show the voltage situation.

Motion detector is then ready for operation. The LED lights up and the

detector monitors the surrounding area, approx. 12 metres. If movement

is detected, detector sends alarm signal to the alarm central, which

triggers alarm in this case.

3.)

5.)

5. Adjust the direction of the detector

4.)