Recording 1 - Teac GF GF-450K7 Owner's Manual

1
Audio from the PHONO/TAPE (cassette tapes)/AUX sources
can be recorded on the CD recorder.
1 Press the PHONO/TAPE/AUX button once or twice to select
the source to be recorded.
To record a record or cassette tape, select PHONO/TAPE and set
the Input Selecting switch by the turntable to the desired source.
To record an external source connected to the AUX IN jacks,
select AUX.
2 Load a recordable CD-R or CD-RW disc into the unit.
Press the OPEN/CLOSE button (L), place a disc on the disc tray
with the printed label side up, and then press the OPEN/CLOSE
button (L) to close the disc tray.
Make sure "NO TOC" and "CD-R" (or "CD-RW") indicators lights on
the display, or the RECORD button in step

Recording 1

2 2
will not work.
4
Select the mode of track number assignment using the
3
MANUAL/AUTO REC button of the remote control unit.
When the MANUAL/AUTO REC button is pressed once, the
current mode is displayed. Press the MANUAL/AUTO REC button
repeatedly to select any other mode.
– – (MANUAL)
Track numbers are not given automatically.
Use the TRACK INCREMENT button to divide tracks.
MANUAL is recommended for recording an analog source such
as a record.
–20db, –30db or –40db (AUTO REC)
The unit will automatically insert a track division in the recorded
material when the sound level has dropped below the threshold
for more than 2 seconds, and sound has re-started.
"–20db" takes a louder signal to trigger the track increment.
"–40db" means that a relatively quiet signal will trigger the track
increment. "–40db" is suitable for recording a noiseless source
such as a CD.
< AUTO REC may not work properly with analog sources that
contain low-level noises.
< The AUTO TRACK indicator lights when –20dB, –30dB or –40dB is
selected.
< The default setting is MANUAL (off). When the unit is turned on,
the setting is automatically reset to MANUAL (off).
Press the POWER button or FM/AM button to reset the setting to
"MANUAL."
< The MANUAL/AUTO REC button doesn't work during recording
or in the record pause mode.
Switching is disabled immediately after a disc is placed. Switch
after "NO TOC" is displayed.
23