Programmed Playback - Teac GF GF-450K7 Owner's Manual

Up to 32 tracks can be programmed in the desired order.
< Insert a disc and select "CD" before beginning programming.
< Shuffle playback does not work during programmed playback.
< Programmed playback works with finalized discs only.
1 Press the PROGRAM button in the stop mode.
"PROGRAM" indicator blinks, and "P-01" appears on the display.
2 Press the MUSIC SKIP button (. or /) to select a
track.
track number
Press the PROGRAM button.
3
The track is programmed, and "P-02" is displayed.
Repeat step and to program more tracks.
2 3
< You can program up to 32 tracks.
< To cancel the program mode, press the STOP button (H).
20

Programmed Playback

4 When the selection of track numbers has been finished,
press the PLAY button (y) to start program playback.
To check the programmed order
In the stop mode, press the MUSIC SKIP button repeatedly to
show the track numbers that have been stored in memory.
To add a track to the end of the program
In the stop mode, press the PROGRAM button.
Select a track number by pressing the MUSIC SKIP button, and
then press the PROGRAM button.
The track is added to the end of the program.
To delete the last track from the program
In the stop mode, press the CLEAR button to delete the last track
from the program.
To clear the program
If one of the following buttons is pressed, the programmed
contents will be cleared:
OPEN/CLOSE, POWER, FM/AM, PHONO/AUX,
STOP in the stop mode