Listening To A Cd 1 - Teac GF GF-450K7 Owner's Manual

Press the CD button.
1
"--" blinks for a few seconds.
When no disc is set, "nOdISC" appears on the display.
Press the OPEN/CLOSE button (L).
2
Place a disc on the tray with the printed label face up.
3
< Never place more than one disc on the tray.
< The disc must be placed in the center of the disc tray. If the disc
is not correctly loaded, it may not be possible to open the tray
again once it has closed, so you should ensure the disc is always
centered on the tray.
< Do not force the tray by hand during opening and closing
operations.

Listening to a CD 1

1 5
3 2 4
4 Press the OPEN/CLOSE button (L) to close the tray.
< It takes a few seconds for the unit to load the disc. No buttons
will work during loading. Wait until the total number of the
tracks and the total play time of the disc are displayed.
< The disc type indicator shows the type of disc currently loaded.
CD:
CD-R:
CD-RW:
NO TOC CD-R:
NO TOC CD-RW:
blank:
< When a non-music CD is inserted, its contents may be detected
and playback may start. However, no sound is generated.
Press the PLAY button (y) to start playback.
5
Disc playback starts from the first track, and the PLAY indicator
(y) lights on the display.
< If you load the disc, and then press the PLAY button without
having first closed the disc tray, the disc tray closes and playback
starts.
disc type indicator
total number of the tracks
A commercial pre-recorded CD
A finalized CD-R
A finalized CD-RW
A CD-R which has yet to be finalized
A CD-RW which has yet to be finalized
Unreadable disc
total play time of the disc
17