Factory Configuration; Operation - LEGRAND PRO 21 7756 32 Manual

Description
Infrared cell
ON / OFF
Command
keys
Communication media
PLC => Power line current
IR => Infrared

Operation

The switch :
- can simultaneously control a set of products (actors) that have been associated with it during the learn phase
the Leader of the scenario (2)
- can be controlled by other Leader products. It is then an Actor in the scenario
As Leader (transmitter) :
Using the ON and OFF keys, the switch can control both :
- local lighting points that are connected to its terminals,
- lighting points that are connected to the other products associated with it (the actors).
Note : It is only necessary to learn the ON key. The OFF key is learned automatically.
As Actor (receiver) :
It can be an actor in 16 scenarios, locally executing the ON and OFF commands requested by the leader products.
It can also command radio products throught the interface RF/PLC ref. 036 06.
It has an infrared interface enabling control of products in the installation via an "In One by Legrand" remote control
(e.g. : 882 00).
(1)
Learn phase : operation to associate products so that they can be controlled simultaneously from a central point.
This association is carried out by applying the learn scenario procedure on page 5.
(2)
Scenario : corresponds to the set of products (actors) that are associated with a command key.
LEARN
indicator lamp
ID number
LEARN key
(1)
,

Factory configuration

The first time it is switched on, pres-
sing the ON or OFF keys controls
all lighting points in the "In One by
Legrand"installation.
Pressing Learn(1) twice cancels
this general control function.
(1) Programming or learn key.
ON / OFF
Command
keys
3
(2) .
4
(1) . It is then