Miscellaneous; Functions For Educational Purposes; Deactivating Or Activating The Demo Function; Deactivating Or Activating The Arranger - Roland Interactive Arranger EXR-46 OR Owner's Manual

r EXR-46 OR

17. Miscellaneous

Functions for educational purposes

The EXR-46 OR provides two functions that may come in handy
for music teachers or for those who use the EXR-46 OR in class:

Deactivating or activating the Demo function

The EXR-46 OR's Demo function can be switched off so that
pressing [USB]+[ONE¥TOUCH] will have no effect at all. This may
be useful in situations where the EXR-46 OR is used in class.
Here is how to deactivate the Demo function:
(1) Switch off the EXR-46 OR.
(2) Hold down the [USB], [ONE¥TOUCH] and [ACOUSTIC] but-
tons while switching the EXR-46 OR back on again.
The display briefly shows "DISABLED".
This setting is remembered, so that next time you want to
listen to a demo song, you have to repeat the above proce-
dure.

Deactivating or activating the Arranger

Use the following procedure to ensure that the Arranger cannot
be started or stopped:
(1) Switch off the EXR-46 OR.
(2) Hold down the [ACOUSTIC] and [ARRANGER¥BAND] but-
tons while you switch the EXR-46 OR back on again.
The display briefly shows "DISABLED". It is now impossi-
ble to start/stop the Arranger using the [START÷STOP] but-
ton.
Repeat the above procedure when you want to use the
Arranger again.
58
Deactivating or activating the Arranger and Demo
functions
A third "educational" option is to switch off both the Demo and
the Arranger functions in one go:
(1) Switch off the EXR-46 OR.
(2) Hold down the [ACOUSTIC] and [START÷STOP] buttons
while you switch the EXR-46 OR back on again.
The display briefly shows "DISABLED". It is now impossi-
ble to start/stop the Arranger or demo song playback.
Repeat the above procedure when you want to use the
Arranger and Demo function again.

Initializing your EXR-46 OR (Factory)

After working extensively with your EXR-46 OR, you may want
to recall the original factory settings. Note that the Recorder
song will be empty and that the User Programs contain the
factory settings after initializing your EXR-46 OR.
Here is how to initialize your EXR-46 OR:
(1) Power off your EXR-46 OR.
(2) Hold down the [USER¥PROGRAM÷WRITE] button while
turning your EXR-46 OR back on again.
The message "Factory" informs you that the EXR-46 OR
has been initialized.
Note: This does not affect the data in the EXR-46 OR's Flash
memory. See page 44 for how to initialize that area.