Removing Styles From The Flash Memory; Removing A User Program Set From The Flash Memory - Roland Interactive Arranger EXR-46 OR Owner's Manual

(3) Use the SELECT [√][®] buttons to select the song you wish
to delete.
SELECT
(4) Press the [YES/+] button.
The display now shows the "Sure?" message, while Yes
starts flashing.
(5) Press the [YES/+] button again to delete the song (or
[NO÷–] if you do not want to delete it after all).
The display now shows the following message:
Removing
Once the file has been deleted, the display briefly shows the
"Complete" message.
(6) Press another "big" button in the DATA ENTRY section to
leave this function.

Removing Styles from the Flash memory

Styles you no longer need can be deleted (which is called
"Remov" here) to make room for new Styles.
(1) Press [FUNCTION].
(2) Use FAMILY [√][®] to select the "RemovSTL" parameter.
Wait until the display shows the name of the first Style
memory (101), then proceed with the following step.
Note: The "No Style" message means that there are no
Music Style data that could be deleted.
(3) Use the SELECT [√][®] buttons to select the Music Style you
wish to delete.
(4) Press the [YES/+] button.
The display now shows the "Sure?" message, while Yes
starts flashing.
(5) Press the [YES/+] button again to delete the Style (or
[NO÷–] if you do not want to delete it after all).
The display now shows the following message:
Removing
Once the file has been deleted, the display briefly shows the
"Complete" message.
(6) Press another "big" button in the DATA ENTRY section to
leave this function.

Removing a User Program set from the Flash memory

The "RemovUPG" function allows you to erase User Program
sets from the EXR-46 OR's Flash memory. This may be necessary
to make room for new files (e.g. when the "Memory Full" mes-
sage appears). Be careful, though, to only delete files you are
absolutely (positively) sure you will never need again. Once a file
has been deleted, it is gone forever.
Note: As a rule, you should first make a backup copy of your disk on
your computer. After all, most files really only become indispensable
once they are no longer available...
(1) Press [FUNCTION].
FUNCTION
(2) Use FAMILY [√][®] to select the "RemovUPG" parameter.
Wait until the display shows the name of the first User Pro-
gram set, then proceed with the following step.
Note: The "No Files" message means that there are no set
data that could be deleted.
(3) Use the SELECT [√][®] buttons to select the User Program
set you wish to delete.
SELECT
(4) Press the [YES/+] button.
The display now shows the "Sure?" message, while Yes
starts flashing.
(5) Press the [YES/+] button again to delete the User Program
(or [NO÷–] if you do not want to delete it after all).
EXR-46 OR
51