Symbols In The Manual; General Safety Instructions - Grizzly KSG 220 Translation Of The Original Instructions For Use

Symbols in the manual

Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.

General safety instructions

• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
• For safety reasons children and young
persons under 16 years, in addition to
persons who are not familiar with the
operating manual, may not operate
the device.
Safe operation:
Keep work area clear.
•
Cluttered areas and benches invite
injuries.
Consider work area environment.
•
- Do not expose tools to rain. Do not
use tools in damp or wet locations.
Water entering a power tool will in-
crease the risk of electric shock.
- Keep work area well lit.
- Do not use tools in the presence of
flammable liquids or gases.
Power tools create sparks which
may ignite the dust or fumes.
• Guard against electric shock.
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radia-
tors, ranges, refrigerators).
• Keep other persons away.
Do not let persons, especially chil-
dren, not involved in the work touch
the tool or the extension cord and
keep them away from the work area.
Store idle tools. When not in use,
•
tools should be stored in a dry locked-
up place, out of reach of children.
• Do not force the tool. It will do the
job better and safer at the rate for
which it was intended.
• Use the right tool.
- Do not force small tools to do the
job of a heavy duty tool.
- Do not use tools for purposes not
intended; for example do not use
circular saws to cut tree limbs or
logs.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
• Dress properly.
- Do not wear loose clothing or jewel-
lery, they can be caught in moving
parts.
- Anti-slip footwear is recommended
when working outdoors.
- Wear protective hair covering to
contain long hair.
Use protective equipment.
•
- Use safety glasses.
- Use face or dust mask if working
operations create dust.
• Connect dust extraction equip-
ment. If the tool is provided for the
connection of dust extraction and col-
lecting equipment, ensure these are
connected and properly used.
• Do not abuse the cord. Never yank
GB
121