Grizzly KSG 220 Translation Of The Original Instructions For Use page 122

GB
the cord do disconnect it from the
socket. Keep the cord away from
heat, oil and sham edges.
• Secure work. Where possible use
clamps or a vice to hold the work. It is
safer than using your hand.
• Do not overreach. Keep proper foot-
ing and balance at all times.
This enables better control of the pow-
er tool in unexpected situations.
• Maintain tools with care.
Many accidents are caused by poorly
maintained power tools.
- Keep cutting tools sharp and clean
for better and safer performance.
- Follow instruction for lubricating and
changing accessories.
- Inspect tool cords periodically and if
damaged have them repaired by an
authorized service facility.
- Inspect extension cords periodically
and replace if damaged.
- Keep handles dry, clean and free
from oil and grease.
Disconnect tools. When not in use,
•
before servicing and when changing
accessories disconnect tools from the
power supply.
Such preventive safety measures re-
duce the risk of starting the power tool
accidentaIly.
Remove adjusting keys and
•
wrenches. Form the habit of check-
ing to see that keys and adjusting
wrenches are removed from the tool
before turning it on.
A wrench or a key left attached to a
rotating part of the power tool may re-
sult in personal injury.
• Avoid unintentional starting. Ensure
switch is in "off" position when plug-
ging in.
• Use outdoor extension leads. When
the tool is used outdoors, use only
extension cords intended for outdoor
122
use and so marked.
• Stay alert, watch what you are do-
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inatten-
tion white operating power tools may
result in serious personal injury.
• Check damaged parts. This will en-
sure that the safety of the power tool
is maintained.
- Before further use of tool, it should
be carefully checked to determine
that it will operate properly and per-
form its intended function.
- Check for alignment of moving
parts, binding of moving parts,
breakage of parts, mounting and
any other conditions that may affect
its operation.
- A guard or other part that is dam-
aged should be properly repaired or
replaced by an authorized service
centre unless otherwise indicated in
this instruction manual.
- Have defective switches replaced
by an authorized service centre.
- Do not use the tool if the switch
does not turn it on and off.
There is a risk of injury.
• Warning.
The use of any accessory or attach-
ment other than one recommended in
this instruction manual may present a
risk of personal injury.
• Have your tool repaired by a quali-
fied person. This electric tool com-
plies with the relevant safety rules.
Repairs should only be carried out by
qualified persons using original spare
parts, otherwise this may result in
considerable danger to the user.
• If the supply cord of this power tool
is damaged, it must be replaced by