Pitch And Tempo Changes - Tascam CD-VT1MKII Owner's Manual

Portable cd vocal trainer
Table of Contents

Advertisement

There are four ways to change the way
a CD is played back, using menu items
in the Tempo Key menu: Tempo con-
trol (
), VSA (Variable Speed Audi-
TMP
tion) setup (
), Key control (
VSA
Fine tuning (
)
FINE
Tempo control
Tempo control allows you to change
the tempo of a track.
Press the
TMP/KEY
key to enter the
Tempo Key menu, and select
pressing either the
PREV
or
blinks on the display.
TEMPO
When VSA is ON (see below), the set-
tings you can choose are: -50, -32, -16,
-12, -8, -4, 0 (off), +4, +8, +12, and
+16%. Press the
UP
or
DOWN
set the value.
When VSA is OFF you can change the
setting between –50 and +16% in 1%
steps.
Press either the
UP
or
DOWN
set the tempo.When the tempo is set to
a value other than zero,
TEMPO
the home display mode.
VSA
When VSA is ON, you can change the
tempo without changing the key.
Press the
TMP/KEY
), and
KEY
Tempo Key menu, select
ing either the
either the
UP
either
or
ON
play. When the VSA is set to ON, the
letters
are shown in the display.
VSA
by
TMP
NOTE
NEXT
key.
If the tempo control value is not set to 0 and
you change VSA from OFF to ON, the tempo
value will be automatically reset to a "VSA ON
value." For example, if the value displayed is
-33 when VSA is OFF, it will automatically be
adjusted to -50 when you turn VSA ON.
keys to
Key control
Key control changes the key of the mu-
sic up or down by six semitones.
Press the
TMP/KEY
Tempo Key menu, and select
key to
pressing either the
blinks on the display. Press either
KEY
shows in
the
UP
or
DOWN
for the key. The range is ± 6 semitones

Pitch and tempo changes

key to enter the
by press-
VSA
PREV
or
NEXT
key. Press
or
DOWN
key to choose
blinks on the dis-
OFF. TEMPO
key to enter the
by
KEY
PREV
or
NEXT
key.
key to set the value
(
6 – 0 (off) –
6). When the key is set
I
O
to a value other than zero,
the home display mode.
Fine tuning
Fine tuning changes the key of the mu-
sic by cents (100 cents = 1 semitone).
This allows you to make fine adjust-
ments and allow for slight tuning dif-
ferences between your instruments and
the CD.
Press the
TMP/KEY
key to enter the
Tempo Key menu, and select
pressing either the
PREV
or
blinks on the display. Press either
KEY
the
UP
or
DOWN
key to set the fine
tuning value.
The range for adjustment is ±50 cents
(-50 – 0 (off) – +50). If the key con-
trol is set to
6, however, the available
O
range of fine tuning is between -50 – 0,
and when it is set to
6, the fine tun-
I
ing range is between 0 – +50. When
the fine tuning is set to a value other
than zero,
shows in the home dis-
KEY
play mode.
(continued on the next page)
TASCAM CD-VT1MKII —
shows in
KEY
by
FINE
NEXT
key.
17

Advertisement

Table of Contents
loading

Table of Contents