Table of Contents
Advertisement
Warning and status messages
The following is a list of warning messages that may be
displayed by the 2488neo, together with a note of their
possible cause, and the actions you can take when they
occur.
No. Message
Cannot do this
when not
stopped. Stop
1
the transport.
Press [EXIT].
Cannot find
digital input.
Check your
2
system set-up.
Press [EXIT].
Can't duplicate
to the same
track as the
3
source.
Press [EXIT]
Digital input
is selected.
Cannot do this
4
operation now.
Press [EXIT].
Disc is already
blank. Can't
5
erase it.
Press [EXIT].
Disc is blank.
Can't finalize
6
this disc.
Press [EXIT].
File too big to
import. Choose
another file
7
for import.
Press [EXIT].
File too big to
export. Choose
another file
for export.
8
Press [EXIT].
Meaning
The hard disk is being accessed for playback
or recording, so the selected action cannot
be performed.
Digital audio input mode has been selected,
but the 2488neo cannot detect a valid digital
audio input.
When editing tracks, you have selected the
same track as both source and destination for a
duplicate operation.
Because digital audio input is selected, the
following functions cannot take place: Tuner,
pitch and SSA functions, MTC slave operations,
jog and trim functions, audio CD operations).
An attempt has been made to erase a disc
(CD-RW) that is already blank.
An attempt has been made to finalize a blank
disc (CD-R or CD-RW).
The selected WAV or Standard MIDI File cannot
be imported into the current song as there is not
enough disk space on the current partition.
The data selected for export to the FAT partition
is too big (there is not sufficient space on the
FAT partition).
15 − Appendix
In the messages, keys to be pressed are enclosed in brack-
ets ([
] or
YES/ENTER
[NO/EXIT
ten in uppercase/capital letters (
Action
Press NO/EXIT, stop the transport and retry
the operation.
Press NO/EXIT and check the digital connec-
tion. If the connection is good, it is possible
that the signal is the wrong type. The 2488neo
expects a signal in S/PDIF (IEC60958
Consumer use) format at 44.1 kHz. It cannot
accept compressed audio formats, etc.
Press NO/EXIT and select a different source or
destination track as appropriate.
Press NO/EXIT and turn off digital input (the
MIXER section of the PREFERENCES menu)
before proceeding with the operation that
produced this message.
Press NO/EXIT and replace the disc if necessary.
Press NO/EXIT and replace the disc if
necessary.
Press NO/EXIT and delete a song (SONG
-> DELETE) to free up space on the partition
(note that this cannot be undone).
Press NO/EXIT, use the USB OPEN function
to manage the files (move or delete unwanted
ones) on the FAT partition from a computer
and retry. Alternatively, if there is no wanted
data on the FAT partition, use the 2488neo to
reformat the FAT partition (all data on the FAT
partition is irrecoverably lost). The maximum
file size is 4 GB.
]) and menu items are writ-
DELETE UNUSED
).
117
TASCAM 2488neo
Advertisement
Table of Contents
