Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tascam CC-222SL
Summary of Contents for Tascam CC-222SL
- Page 1 » D00964320A CC-222SL CD Recorder/Cassette Deck Professional OWNER'S MANUAL...
-
Page 2: Important Safety Precautions
CE Marking Information a) Applicable electromagnetic environment: E4 b) Peak inrush current: 1.2 A In North America use only on 120V supply. TASCAM CC-222SL WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. -
Page 3: Important Safety Instructions
AC outlet with a protective grounding connection. • Batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like. • Excessive sound pressure from earphones and head- phones can cause hearing loss. TASCAM CC-222SL... -
Page 4: Safety Instructions
The label required in this regulation is shown at 1. For USA For China TASCAM CC-222SL CAUTION • DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER. • USE OF CONTROLS OR ADJUSTMENTS OR... -
Page 5: Table Of Contents
About this manual ... 9 Use of the remote control unit ... 10 Batteries ... 10 Inserting batteries ... 10 2 – Features of the CC-222SL ...11 Front panel ... 11 Rear panel ... 12 Display ... 13 RC-222SL Remote control unit ... 14 3 –... -
Page 6: 1- Introduction
Before connecting and using the unit, please take some time to read this manual thoroughly to ensure you under- stand how to properly set up and connect the CC-222SL, as well as the operation of its many useful and convenient functions. -
Page 7: Rack-Mounting The Unit
19-inch equipment rack, as shown in this section. Remove the feet of the unit before mounting. Some notes, precautions and environmental considerations The CC-222SL may be used in most areas, but to maintain top performance, and prolong operating life, observe the following notes, precautions and environmental conditions: •... -
Page 8: Handling Of Compact Discs
CC-222SL disc may not play back satisfactorily on every audio CD player. It will, naturally, be playable on the CC-222SL. This is in no way a limitation of the CC-222SL itself, but of the difference between the different types of media and the methods used to read them. -
Page 9: About Finalizing
As C-120 tapes are mechanically weak, and could become entangled in the transport mechanism, we do not recom- mend their use. • Selectable values (i.e. values in dB) or ON and OFF selections (i.e. ) are shown in the following SRC>XXX typeface: TASCAM CC-222SL... -
Page 10: Use Of The Remote Control Unit
• The remote control functions by using an infrared light signal. When using the unit to control the CC-222SL, other devices that are turned on could be operated by its signal. Batteries If batteries are used improperly, or if leakage or breakage occurs, the unit will not function. -
Page 11: Features Of The Cc-222Sl
Repeated presses of this key cycles INPUT 1 SEL key through the different sources available for the CD drive: OPTICAL COAXIAL LINE 1 PHONO 2 – Features of the CC-222SL 0 i d z PHONO key the cassette or disc recorder, depending on the selection made in the menu system. -
Page 12: Rear Panel
(2). RIA A PHONO INPUT (L , R) a nd G ND ter mina l Use these connectors to connect a record deck to the CC-222SL. The destination of the signal is determined by a menu item. TASCAM CC-222SL CD TIMER (OFF/PLAY) switch the CD timer option on or off. -
Page 13: Display
TOC data is loaded. CD PLAY ) Lights during disc playback. ¥ 2 – Features of the CC-222SL CD PAUSE standby mode. CD REC standby mode. Lights when the SYNC recording mode is on. -
Page 14: Rc-222Sl Remote Control Unit
2 – Features of the CC-222SL 1- Introduction RC-222SL Remote control unit Tape RESET key Resets the tape counter to zero. Tape RTZ key Returns the tape to the zero position. Ejects the loaded disc. Disc Eject key Fast-rewinds or fast-forwards the Tape ∆... -
Page 15: Menu Operation
Alternatively, keep pressing the normal time counter is displayed. Default (factory) value Described in: “Sampling Frequency conversion” on page 20 0dB “Signal volume” on page 20 LEVEL “Automatic track division” on page 25 1 min “Automatic track division” on page 25 –24 dB (analog) “Setting the trigger level” on page 24 and –54 dB (digital) “Using the trigger level” on page 24 1 GEN “Copy-protection” on page 26 “Fade-in and fade-out” on page 25 “Fade-in and fade-out” on page 25 THRU “Dubbing tapes from the CD deck” on page 30 and “Dubbing from tape to disc” on page 23 DISC “Recording tapes from the PHONO deck” on page 31 and “Recording to disc from the RIAA PHONO inputs” on page 22 OFF “Directory playback setting” on page 19 TAPE “OUT2 setting” on page 32 to change a value or setting. to confirm the change and exit key until the MENU TASCAM CC-222SL... -
Page 16: Disc Operations
1 To play tracks 1 through 9, simply press the appro- priate key (1 through 9). 2 To play a track whose number is higher than 9, press the +10 key an appropriate number of times to TASCAM CC-222SL 2 Press the key to start playback PLAY The track number indicators at the bottom of the display light, to show the available tracks playing back. If there are thirteen tracks on the disc, for example, indicators 1 through 13 will light. -
Page 17: Playback Modes
Ejecting the STOP key also stops random playback. SKIP moves backwards and for- STOP key on the remote control is CLEAR PLAY MODE until the . The program is also cleared key is pressed STOP PGM appears on the display. TASCAM CC-222SL... -
Page 18: Repeat Playback
(see “Search keys” on page 32). NOTE This function is only possible using the remote control unit. TASCAM CC-222SL To cancel repeat mode, press the the display shows goes out. Cancel the A-B repeat mode by pressing the STOP key. -
Page 19: Playing Back Mp3 Files
PC. The CC-222SL can play back MP3 files recorded in formats which conform to ISO9660 level 1, level 2, and the Joliet extensions. Discs recorded in multiple sessions may also be played back. -
Page 20: Recording Cds
RECORD Sampling Frequency conversion The sampling frequency for CDs is 44.1 kHz. The CC-222SL will always record (and play back) CDs at this frequency. However, if recording through a digital connection (either coaxial or optical) and the source has been recorded at a frequency other than 44.1 kHz, or is being played back at a... -
Page 21: Basic Recording
It is not possible to record in two ” stages” within one track. , the unit is oper- key to start re- 1- Introduction to stop recording. When recording (Program PMA Wr i t i ng key (step 2) before restarting the record- TASCAM CC-222SL... -
Page 22: Time Display While Recording
( Playing back tracks Although an unfinalized disc cannot be played back on an ordinary CD player, the CC-222SL can play back tracks Restricting the number of tracks When making a recording, it is possible to restrict the number of tracks that may be recorded at one time. -
Page 23: Dubbing From Tape To Disc
A recordable disc must be loaded in the drive. The to THRU DUB 1 key is disabled if the media are not loaded, and if the drives are in any mode other than stop. item ap- 1- Introduction keys. STOP TASCAM CC-222SL... -
Page 24: Advanced Recording
This part of the track may not be recorded S_LVL TASCAM CC-222SL Low numerical values of this setting (towards –24) mean that it takes a louder signal to trigger the start of the synchronized recording. A high numerical value (towards – 72) means that a relatively quiet signal will trigger the start... -
Page 25: Synchronized Recording
To enable or disable automatic track division: ª 1 While record standby mode, press the repeatedly until the display shows where 2 Use the sired auto track setting. The A_TRAcK indicator lights at the right of the display. Track increment When the will blink. time RECORD key. 1- Introduction key is also used to turn off synchro- MENU A_ TRK > XXX is the current setting. or keys to select the de- MULTI DIAL SKIP mode is selected, the indicator TIME TASCAM CC-222SL key... -
Page 26: Fade-In And Fade-Out
1 While recording is in progress, press the MUTE key. 2 After about four seconds, the unit enters record standby mode. Copy-protection The CC-222SL allows copy-protection to be applied to the discs produced. Naturally, the copy-protection applies only to digital-to-digital copies. There are three settings: • FREE (may be freely copied), where no copy-pro- tection is applied to the recorded disc. -
Page 27: After Recording
Table of Contents (TOC) written to it. This process is known as finalizing. An unfinalized disc can always be distinguished on the CC-222SL by the NO TOC indicator under the disc type on the display being lit when the disc is inserted. CAUTION Do not turn the power off during this operation. -
Page 28: Erasing Tracks
D I SC REFRESH? 3 To refresh the disc, press the MULTI DIAL key. If you do not want to proceed with the refresh op- eration, press the ERASE key or TASCAM CC-222SL been recorded on the disc, 17-17 means that the last track only, number 17, will be erased). The lowest value that this number can take is 2 (if this number was 1, the whole disc would be erased, as described below). If you do not want to proceed with the erase operation, press the NOTE If only one track has been recorded on the disc, only the “erase disc” option (see “Erasing a whole disc” on page 28) is available. -
Page 29: Cassette Operating
However, note that if both are playing, the cassette takes priority (the disc will not be heard through these outputs). The LINE OUTPUTS1 jacks always output the audio from th edisc. setting, key to open the cassette compart- system on or off. key to start playback. STOP key. TASCAM CC-222SL... -
Page 30: Recording Operations
If the tape is in stop mode, the tape rewinds to the beginning of the current side. At the start of the tape, recording starts, but the CD does not start playback for eight seconds. The Dub indicator flashes. The CD starts playback after the eight seconds at the start of the cassette. The Dub, 2 indicator lights steadily. If the tape is in record standby mode, TASCAM CC-222SL 4 Set the 5 Press the standby mode and the indicators light up. 6 Play back the source, and adjust the recording level using the tape deck’s or position. that the loudest sound makes the meters briefly ä reach around the “ 0 dB” point for normal or high- position tapes (recording is not possible with metal tapes). -
Page 31: Dubbing To Tape From The Middle Of A Cd
The deck enters record standby mode when the key is released. level INPUT MONITOR switch set key. Playback starts on the disc, PLAY or PAUSE key. (cassette deck) to stop the recording. key is held and pressed for longer than TASCAM CC-222SL... -
Page 32: Other Tape Functions And Features
However, note that if both are playing at same time, the cassette takes priority (the disc will not be heard through these outputs). TASCAM CC-222SL NOTE If the current tape position is too close to the 0000 mark (greater than 9995 or less than 0004), this func- tion is not available. -
Page 33: Reference And Specifications
Now OPC Now REPAIR PMA Writing TOC Reading REC Standby Blank Disc NO DISC 1- Introduction Details / Response Use unfinalized recordable disc. The unit may ejects the loaded disc. If it is CD-RW disc, you may refresh it (“Refreshing a disc” on page 28), or replace disc. There is no space on disc, or no tracks are available. There is problem with the Drive mechanism. Digital input is not connected. Turn on power of source unit and connect to DIGITAL IN. The data cannot be erased. An error has occurred while trying to erase disc. The sampling frequency of digital input is not 44.1kHz. Please turn SRC on (“Frequency conversion” on page 20). An attempt has been made to create more than 99 tracks. A general recording error. Try recording again with different disc. The unit may ejects the loaded disc. System Error. Try turning the power off and on again. There is a problem with the disc slot. Statement An operation such as finalize or erase has been successfully completed. Calibration is being performed to operate recording properly. The disc is being repaired and this operation will take a long time. Please do not turn off power of the unit until it finishes. Recorded content is being written to disc. Table of contents data is being read. The unit is in recording standby mode. A blank recordable disc has been inserted. A disc is not loaded into the unit. TASCAM CC-222SL... -
Page 34: Specifications
Wow and flutter Digital input Fs Digital input Digital output Line inputs 1 Line outputs 1 Cassette recorder section Number of channels Heads Type of tapes Tape speed Motor Wow and flutter Frequency response (overall) Signal-to-noise ratio (overall) Fast winding time Line inputs 2 Line outputs 2 TASCAM CC-222SL CD-R, CD-R-DA, CD-RW, CD-RW-DA (High speed CD-RW is supported) 16 bit linear 44.1 kHz 20 Hz~20 KHz ±0.8 dB (playback) ±1.0 dB (recording) 92 dB (playback) 88 dB (recording) 92 dB (playback) 88 dB (recording) 0.006% (playback) 0.01% (recording) 80 dB (playback:1kHz) 75 dB (recording:1kHz) unmeasurable (< 0.001 %) 32 kHz to 48 kHz (SRC ON) 44.1 kHz (SRC OFF) Coaxial RCA pin jack (IEC60958 Consumer use) -
Page 35: Phono Input And Headphones
8 – Reference and specifications Phono input and headphones RIAA PHONO INPUT (headphone output) PHONES General specifications Power Power consumption Dimensions (d x w x h) Weight Dimensional drawing 1- Introduction Unblanced RCA (with ground) Cartridge type MM (moving magnet) Input signal level 5.6 mV Input impedance 50 k Ø S/N ratio 60 dB (6.3 Ø 6 mm (1/4”) stereo Output level 10 mW + 10 mW (into 32 U.S.A./Canada 120 VAC, 60 Hz U.K./Erope 230 VAC, 50 Hz Australia 240 VAC, 50 Hz 33 W 295 x 435 x 138 (mm) 11.6 x 17.13 x 5.4 (in) 6.9 kg (15.2 lb) Ø TASCAM CC-222SL... - Page 36 CC-222SL TEAC CORPORATION Phone: +81-422-52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.A. De C.V Phone: +52-555-581-5500 Campesinos No.