Table of Contents
Advertisement
10 − File import/export
USB import (mono WAV files)
When importing mono WAV files from a computer, they
are first stored on the FAT partition (see " Hard disk and
partitions " on page 13).
1
With the transport stopped, connect the 2488neo
and a computer using USB (see "Opening the USB
connection" on page 81).
2
Drag and drop mono WAV files from your comput-
er's disk to the WAVE folder on the 2488neo's FAT
partition.
3
Disconnect the 2488neo and the computer (see
"Closing the USB connection" on page 81).
Use the following procedures to copy files from the FAT
partition to virtual tracks.
4
With the transport stopped, press
MENU screen appears.
5
Select the WAVE IN/OUT and press
The WAVE IN/OUT menu screen appears.
6
Select the USB IMPORT and press
USB import (stereo WAV files)
When importing stereo WAV files from a computer, they
pass through the FAT partition (see " Hard disk and parti-
tions " on page 13).
1
With the transport stopped, connect the 2488neo
and a computer by USB (see "Opening the USB
connection" on page 81).
2
Drag and drop stereo wave files from your comput-
er's disk to the WAVE folder on the 2488neo FAT
partition.
3
Disconnect the 2488neo and the computer
(see"Closing the USB connection" on page 81).
Follow the procedures below to copy a file from the FAT
partition to a virtual track pair assigned to a physical
track pair.
4
With the transport stopped, press
MENU screen appears.
5
Select the WAVE IN/OUT and press
The WAVE IN/OUT menu screen appears.
82
TASCAM 2488neo
7
8
MENU
. The
YES/ENTER
.
9
YES/ENTER
.
10 Repeat procedures 7 to 9 as necessary.
6
7
. The
MENU
8
.
YES/ENTER
You can choose physicals track pairs from mono track
pairs 1/2–11/12 and stereo track 13/14–23/24.
Use the dial (or the cursors) to select the wave file
that you want to use. Press
Now you can select the virtual track to which the
wave file will be copied. Press
A comfirmation pop-up message appears.
Press the
YES/ENTER
key again to copy the WAV
file to the virtual track.
To use the imported WAV file, assign the virtual
track containing the file to a physical track (see
"Virtual tracks" on page 66).
Select ST.WAV IMPORT, and press the
key to open the ST.WAV IMPORT screen.
Use the dial (or the cursors) to select the wave file
that you want to use. Press
Now you can select the physical track pairs to which
the wave file will be copied. Press
.
YES/ENTER
YES/ENTER
.
YES/ENTER
.
YES/ENTER
YES/ENTER
.
Advertisement
Table of Contents
