Table of Contents
Advertisement
3 − Names and functions of the 2488neo
3 − Names and functions of the 2488neo
Top panel
Input channel section
Controls for the 8 input channels (
be assigned to the track mixer or sub mixer.
PHANTOM switch
1
Turns phantom power for the
channels
A
–
D
ON and OFF. Turn this switch ON when
connecting condenser mics that requires +48 V of
external power.
CAUTION
When the PHANTOM switch is ON, do not change the
connections for inputs A–D. Do not connect or discon-
nect mics with the phantom power turned ON.
TRIM knobs (A–H)
2
Adjusts gain of
MIC/LINE
wise raises gain (increases signal level).
INPUT keys (A–H)
3
Pressing the
INPUT
key of an input channel selects it as
an active channel and the key lights. An active channel
is affected by mixer functions and other operations.
These keys are also used for the following purposes.
–
). Input signals can
A
H
XLR
input jacks on input
input jacks. Turning clock-
To assign an input channel to a track channel or the sub
•
mixer (see "Inputs and assignments" on page 29 and
"Sub mixer" on page 35).
To assign effects to an input (see
•
effects" on page 39 and "Assigning the multi-effect" on
page 41).
To link inputs next to each other (see
•
nels" on page 33).
OL indicators
4
These provide warnings about overloaded input levels.
If a channel's OL indicator turns red, turn its
knob counterclockwise to reduce the channel's gain.
"Assigning mic
"Linking chan-
TRIM
17
TASCAM 2488neo
Advertisement
Table of Contents
