Midi Program Change Messages; Scene Memory Program Change Messages - Tascam 2488neo Owner's Manual

Effect
Effect
chain #
4 Wah (WAH)
5 Delay (DLY)

MIDI Program Change messages

The 2488neo can accept Program Change messages to
select an effect and to change scenes. Before a Program
Change message is sent for changing an effect, a Bank
Select message must be sent to select whether an effect will
be selected from the preset bank or from the user bank of
memories. In each case, bank 0 corresponds to the preset
memories, and bank 1 to the user bank.
Send the Bank Select messages (CC 0) on MIDI channels
1 through 8 for mic effects (see below), MIDI channel 9 for
stereo dynamics, channel 10 for the single effect, and chan-
nel 11 for the multi effect.
When selecting a mic effect, a Bank Select message should
first be sent on channel 14 to select the group of eight
channels or inputs out of which the channel is selected:
Bank 0: Mixer channels 1 though 8
Bank 1: Mixer channels 9 through 16
Bank 2: Mixer channels 17 through 24
Bank 3: Inputs A through H
The Program Change messages that are then valid are as
follows (see the tables following for details of the preset
values—the "user" messages correspond to the entry num-
ber in the library):
Mic effects (preset)
Program Change 0 to 3
Mic effects (user)
Program Change 0 to 99 (maximum)
Stereo dynamics effect (preset)
Stereo dynamics effect (user)
99 (maximum)
Single effect (preset)
Program Change 0 to 6
NRPN Parameter
00 15 Attack
00 16 Sense
00 17 (reserved)
00 18 (reserved)
00 19 Switch
00 20 Time
00 21 Feedback
00 22 Hi Damp
00 23 Mix Level
00 24 Type
00 20 Time-L
00 26 Time-R
00 21 Feedback-L
00 27 Feedback-R
00 28 Threshold
Program Change 0 to 1
Program Change 0 to
15 − Appendix
Values
1 – 100 = 0.1 – 10.0 (Hz)
0 – 100 = 0 – 100
0, 1 = Off, On
0 – 1000 = 0 - 1000 (ms)
0 – 100 = 0 – 100
0 – 100 = 0 – 100
0 – 100 = 0 – 100
0 – 6 = OFF, Normal. Pan, Stereo, FB Mod, Gate, Reverse
0 – 1000 (ms) *If type is Stereo only
0 – 1000 = 0 – 1000 (ms) *If type is Stereo only
0 – 100 = 0 – 100 *If type is Stereo only
0 – 100 = 0 – 100 *If type is Stereo only
0 – 100 = 0 – 100 *If type is Gate only
Single effect (user)
Program Change 0 to 99 (maximum)
Multi effect (preset)
Multi effect (user)
Program Change 0 to 99 (maximum)

Scene memory Program Change messages

ª
These are transmitted on channel 16. The Program Change
message may be from 0 to 99.
Program Change 0 to 31
111
TASCAM 2488neo