Endress+Hauser Proservo NMS83 Brief Operating Instructions page 49

Proservo NMS83
Submenu: Setup → Advanced setup → Input/output → HART devices → HART Device(s)
Parameter
Output pressure
Output density
Output temperature
Output vapor
temperature
Output level
1) There is a HART Device(s) submenu for each connected HART device.
2) This setting can be skipped for a connected Prothermo NMT5xx or Micropilot FMR5xx as for these devices the
type of measured value is identified automatically.
Endress+Hauser
Meaning / Action
• If the device measures a pressure: Select which of the HART variables (PV, SV, TV or QV)
contains the pressure.
• Otherwise: Keep the factory setting: No value
• If the device measures a density: Select which of the HART variables (PV, SV, TV or QV)
contains the density.
• Otherwise: Keep the factory setting: No value
• If the device measures a temperature: Select which of the HART variables (PV, SV, TV or
QV) contains the temperature.
• Otherwise: Keep the factory setting: No value
• If the device measures the vapor temperature: Select which of the HART variables (PV,
SV, TV or QV) contains the vapor temperature.
• Otherwise: Keep the factory setting: No value
• If the device measures a level: Select which of the HART variables (PV, SV, TV or QV)
contains the level.
• Otherwise: Keep the factory setting: No value
Commissioning
1) 2)
49