Environment And Enclosure; Preventing Electrostatic Discharge - Rockwell Automation Micro800 Wiring Diagrams

2 Micro800™ 6-Channel Trimpot Analog Input Plug-In Module

Environment and Enclosure

This equipment is intended for use in a Pollution Degree 2 industrial
ATTENTION
environment, in overvoltage Category II applications (as defined in IEC
60664-1), at altitudes up to 2000 m (6562 ft) without derating. This equipment
is considered Group 1, Class A industrial equipment according to IEC/CISPR
11. Without appropriate precautions, there may be difficulties with
electromagnetic compatibility in residential and other environments due to
conducted and radiated disturbances.
This equipment is supplied as open-type equipment. It must be mounted
within an enclosure that is suitably designed for those specific environmental
conditions that will be present and appropriately designed to prevent personal
injury resulting from accessibility to live parts. The enclosure must have
suitable flame-retardant properties to prevent or minimize the spread of flame,
complying with a flame spread rating of 5V A, V2, V1, V0 (or equivalent) if
non-metallic. The interior of the enclosure must be accessible only by the use
of a tool. Subsequent sections of this publication may contain additional
information regarding specific enclosure type ratings that are required to
comply with certain product safety certifications.
In addition to this publication, see:
• Industrial Automation Wiring and Grounding Guidelines, Rockwell
• NEMA Standard 250 and IEC 60529, as applicable, for explanations of

Preventing Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which can cause
ATTENTION
internal damage and affect normal operation. Follow these guidelines when
you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when not in
Publication
2080-WD008A-EN-P - May 2011
Automation publication 1770-4.1, for additional installation
requirements.
the degrees of protection provided by different types of enclosure.
use.