Remote Control Unit; Some Notes And Precautions; Batteries; Inserting Batteries - Tascam CD-01 U Owner's Manual

2 - Remote control unit

Some notes and precautions

≠ When the remote control will not be used for an
extended period of time, please remove the batteries
to prevent the possibility of battery acid leakage
which could damage the unit.
Should leakage occur, remove and discard the bat-
teries, and wipe the battery case thoroughly with a
cloth.
Avoid getting the battery liquid on the skin. After
cleaning, replace with new batteries.
≠ The remote control functions by using an infrared
light signal. When using the unit to control the CD-
01U/CD-01U Pro, other devices that are turned on
could be operated by its signal.
≠ If the range of remote operation becomes smaller, or
commands do not always function properly, the bat-
teries have become weak and should be replaced.
Always replace both batteries with new batteries of
the same type.
≠ Point the remote control to the remote sensor on the
main unit.
Do not obstruct the path between the remote control
and the remote sensor.
8
TASCAM CD-01U/CD-01UPro

Batteries

If batteries are used improperly, or if leakage or break-
age occurs, the unit will not function.
Please observe the cautions indicated on the batteries
and their packaging to ensure proper usage.
≠ Confirm + and - polarity and follow the indications
when inserting new batteries into the remote control.
≠ Do not use old and new batteries together.
≠ Even if the battery is the same size, the voltage may
differ.
Do not use batteries of different specifications
together.
≠ Do not attempt to recharge batteries that are non-
rechargeable.
≠ Do not open or disassemble batteries, throw them
into a fire or put them in water.

Inserting batteries

1. Open the lid.
2. Confirm +/- polarity, and insert two AAA batteries.
3. Close the lid.
7 m