• Products with Class ! construction are equipped with a power supply cord that has a grounding plug. The cord of such a product must be plugged into an AC outlet that has a protective grounding connection. IN USA/CANADA, USE ONLY ON 120 V SUPPLY. TASCAM CD-400U...
If the battery fluid leaks, wipe away any fluid on the battery compartment before inserting new batteries. • Do not disassemble a battery. The acid inside the bat- tery could harm skin or clothing. TASCAM CD-400U...
(RF) CNR-102 de l’IC. Cet équipement émet une restrictions for electromagnetic fields; the harmonised standard énergie RF très faible qui est considérée conforme sans évalua- of DIRECTIVE 2014/53/EU. TASCAM CD-400U...
Page 6
0 Increase the separation between the equipment and receiver. 0 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 0 Consult the dealer or an experienced radio/TV technician for help. TASCAM CD-400U...
1 – Introduction Thank you very much for purchasing the TASCAM CD-400U CD/ Conventions used in this manual MEMORY PLAYER. Before using this unit, read this Owner's Manual carefully so that In this manual, we use the following conventions: you will be able to use it correctly and enjoy working with it for many years.
1 – Introduction Trademarks Precautions for placement and use 0 TASCAM is a registered trademark of TEAC Corporation. 0 The operating temperature range of this unit is 5–35 °C. 0 The SDHC logo is a trademark of SD-3C, LLC. 0 Do not install this unit in the following types of locations. Do- ing so could make the sound quality worse or cause malfunc- tion.
TEAC Global Site 0 Do not use any record spray, anti-static solutions, benzene, (http://teac-global.com) to find the list or contact the TASCAM customer support service. paint thinner or other chemical agents to clean CDs as they could damage the delicate playing surface.
Bluetooth devices. Product registration Profiles Customers in the USA, please visit the following TASCAM web- This unit supports the following Bluetooth profiles. site to register your TASCAM product online. 0 A2DP (Advanced Audio Distribution Profile) http://tascam.com/...
32) i When the current source is AM/FM and preset mode is en- abled, turn the MULTI JOG dial to move to the previous or next preset number. (see “Setting radio station presets” on page 32) TASCAM CD-400U...
Page 13
When the current source is AM or FM, press to tune in a pre- set station. Signals from the wireless remote control (TASCAM RC-CD400) i When the current source is CD, USB or SD, and shift mode are received here. When operating the remote control, point is active (SHIFT indicator lit) press to set the A-B repeat it toward this receiver.
Page 14
To deactivate the shift mode (SHIFT indicator unlit), press the SHIFT button again. SOURCE button Press to switch the current source. (see “Selecting the play- back source” on page 22) TASCAM CD-400U...
1dB in- crements to –14 dBu (-18dB analog output level setting). (1: GND, 2: HOT, 3: COLD) (see “Adjusting the analog output” on page 38) AC IN connector Connect the included power cord here. TASCAM CD-400U...
2 – Names and Functions of Parts Wireless remote control (TASCAM RC-CD400) PRESET button i When the current source is AM or FM, press to program pre- set stations manually. (see “Setting radio station presets manually” on page 32) i When the current source is AM or FM, press and hold to program preset stations automatically.
Preset number When the current source is AM or FM and preset mode is en- abled, this shows the preset number. Frequency received If the current source is AM or FM, this shows the frequency re- ceived. TASCAM CD-400U...
TER button to confirm the setting and return to the Menu screen. Repeat steps 2 to 5 as necessary to set each item. Press the main unit BACK [PAIRING] button or remote con- trol k button to return to the Home Screen. TASCAM CD-400U...
3 – Preparation Making connections This is an example of CD-400U connections. Precautions before making connections 0 Carefully read the operation manuals of the devices to be connected and then connect them correctly. 0 Before making connections, turn this unit and all equipment to be connected off (standby).
Press the POWER switch to turn the unit off. Using the wireless remote control CAUTION See “Wireless remote control (TASCAM RC-CD400)” on page 16 Do not turn the power off or disconnect the power cord for the button functions. when the unit is operating (including playing back or writing When using the remote control, point it toward the receiver on data to an SD card or USB flash drive).
(This will eject discs even when No Disc ap- pears on the Home Screen) If you slide the write-protection switch to the LOCK position, dubbing will not be possible. Remove write-protection to use the dubbing (copying) function. TASCAM CD-400U...
Even when the panel is locked, operations can be received from the remote control. This behavior depends, however, on the IR Remote Lock item setting on the Menu Screen. i The panel lock function on/off setting is retained even when the unit is turned off. TASCAM CD-400U...
Media with more than 300 files or 50 folders might not play properly. Track 008 i Depending on the condition of the disc, playback might skip or not be possible. Track 009 Track and folder structure example TASCAM CD-400U...
Press the main unit PLAY button or the remote control 7 but- ton to start playback. Stopping playback: Press the main unit STOP button or remote control 8 but- ton. Pausing playback: Press the main unit PAUSE button or remote control 9 but- ton. TASCAM CD-400U...
If this happens, press the CLEAR button on the main unit or remote control to cancel selection. Then, try again. i The current folder will change along with movement be- tween folders. TASCAM CD-400U...
Page 26
If repeat playback is activated during folder playback, the tracks in the current folder will be played repeatedly. i If random playback is activated during folder playback, the tracks in the current folder will be played randomly. TASCAM CD-400U...
PLAY 01 00:01 Random playback mode active NOTE i Unless otherwise specified, explanations in this manual as- sume that the playback mode is set to continuous playback mode. i The current playback mode appears on the Home Screen. TASCAM CD-400U...
The A-B repeat playback interval cannot include more than one track. i The A-B repeat setting is not retained when the unit is turned off. TASCAM CD-400U...
If there is no resume point (no time has been set as the re- sume point), the beginning of the playback track will become the resume point. i The resume playback function on/off setting is retained even when the unit is turned off. TASCAM CD-400U...
This is an existing problem in Mac system files, but it does not affect playback by this unit. i “999:59” will continue to be shown if the elapsed track time exceeds this time. TASCAM CD-400U...
22) Select CD-400U (this unit) on the other Bluetooth device. Connect to CD-400U (this unit) on the other Bluetooth de- When pairing succeeds, this unit and that device will be vice. connected and Connected will appear on the Home Screen.
. / / [ l / ; ] buttons to select the preset number to Mono reception mode will automatically be disabled when assign. the received frequency is changed. Press the main unit MULTI JOG dial or remote control EN- TER button to confirm the preset. TASCAM CD-400U...
Press the main unit MULTI JOG dial or remote control EN- TER button. After all preset assignments for the current source have been cleared, the Home Screen reopens. NOTE Press the main unit or remote control CLEAR button to cancel the operation and return to the Home Screen. TASCAM CD-400U...
A-B REP button. Weather reports and forecasts. FINANCE: Financial reports, commerce and trading. CHILDREN: Children’s programs. SOCIAL: Social affairs. RELIGION: Religious programs. PHONE IN: Programs in which the public expresses its views by phone. TASCAM CD-400U...
Page 35
Music from the so-called golden age of popular music. FOLK M: Folk music. DOCUMENT: Documentaries. TEST: Broadcast when testing emergency broadcast equipment or receivers. Not intended for searching or dynamic switching for consumer receivers. ALARM!: A program with notifications about emergencies and natural disasters. TASCAM CD-400U...
Media Full message will appear and dubbing will stop. Press the main unit or remote control CLEAR button to close the mes- sage and return to the Home Screen. TASCAM CD-400U...
0 The recording times shown above are estimates. They might differ depending on the SD/SDHC card or USB flash drive in use. 0 The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card or USB flash drive. TASCAM CD-400U...
Connect the AUX IN jack to a portable audio player or other device. Select AUX as the current source. (see “Selecting the play- back source” on page 22) Press the play button on the connected device to start play- back. TASCAM CD-400U...
To cancel, press the main unit BACK [PAIRING] button or re- mote control k button. Press the main unit MULTI JOG dial or remote control EN- TER button to reset the unit to its factory settings. After it completes, the Menu screen will reopen. TASCAM CD-400U...
If you are having trouble with the operation of this unit, please try the following before seeking repair. If these measures do not solve the problem, please contact the store where you bought the unit or TASCAM customer support service.
S/N ratio 95 dB or higher (when CD/SD/USB playback to Analog outputs, JEITA) Dynamic range 90 dB or higher (when CD/SD/USB playback to Analog outputs, JEITA) Channel separation 90 dB or higher (when CD/SD/USB playback to Analog outputs, JEITA) TASCAM CD-400U...
AM: 2-pin push terminal Dimensional drawings 434.2mm 43.7mm 482.8mm 44mm 2.5mm 465.7mm 0 Illustrations in this manual might differ in part from the actual product. 0 Specifications and external appearance might be changed without notification to improve the product. TASCAM CD-400U...
Page 43
Ce produit est sujet aux réglementations concernant la garantie légale dans le pays d’achat. En cas de défaut ou de problème, veuillez Your unit must be serviced by an authorized TASCAM service station in Except as specified below, this warranty covers all defects in materials contacter le revendeur chez qui vous avez acheté...
Page 44
Printed in China ✄ WARRANTY Model/Modèle/Modell Owner’s name/Nom du possesseur/Name des Eigentümers Modello/Modelo/型号 Nome del proprietario/Nombre del propietario/顾客姓名 CD-400U Serial No./No de Série/Seriennummer Address/Adresse/Adresse Numero di serie/Número de serie/序列号 Indirizzo/Dirección/顾客地址 Dealer’s name/Nom du détaillant/Name des Date of purchase/Date de l’achat/Datum des Kaufs Händlers...