Receiving And Unpacking - Pfannenberg EB 2.0 Series Operating And Maintenance Instructions Manual

•
Although the unit is designed with all the possible safety requirements, in case of external fire there is the possibility that the
internal pressure and temperature of the unit will increase in a dangerous and uncontrollable way; in that case use the
extinguishing tools suitable for that conditions.
• For the series production of the standard units of category Ι, the pressure resistance test (typically the hydrostatic pressure
test) is made on a statistic base, not on all units.
This can be accepted, also considering all the safety devices mounted on the units.
•
For units without emergency switch-disconnector: chiller user must install the emergency switch-disconnector installation
close to the chiller, in an accessible and clearly visible place, to allow emergency stop of the unit and saftefy for the
operator.
•
Even if the instructions contained in this manual are enough explanatory for safety, high pressure switches/safety valves
are mounted, to guarantee intervention in case of wrong filing, or in case of malfunction due to not controlled increase of
pressure and temperature.

4 Receiving and Unpacking

Each chiller is supplied on a wooden pallet, wrapped with protective film, strapped, and protected on lateral sides.
Some units are also contained in a carton box.
It is recommended to pay particular attention during handling and transportation of the unit and to maintain the packaged units
in the vertical position, in order to avoid any kind of dents to the external frame and any damage to the internal components.
Secure units to the transport vehicle with suitable strapping.
Note:
The above mentioned packages are not suitable for piling up units on top of each other
Store the Chiller in a dry place, away from heat sources. All waste materials should be recycled in the appropriate manner.
For the operations of lifting and movement it is necessary to use a fork lift truck with proper load capacity and with forks longer
than the base of the Chiller. Avoid sudden movements which can damage the framework and the internal components.
PFANNENBERG Std Chiller (above 45 kg weight) can be provided with 4 eyebolts for lifting and transportation; to be used for
vertical loading/unloading only (to see the right point for lifting please refer to the stickers on the unit). Where eyebolts are not
installed as standard, they can be provided as accessory.
CAUTION!
The chiller must be transported and moved without liquid/s in the tank/s
Check after the final positioning of the Chiller the internal connections to avoid damage during operation.
70040-106_01-C_EN-DE-IT_comp.doc
English
Picture 1 – Chiller lifting
6