Ambient Temperature - Pfannenberg EB 2.0 Series Operating And Maintenance Instructions Manual

8 Ambient temperature

Chiller is designed to operate in the ambient temperature range indicated in the type label. When ambient temperatures are out
of that range, manufacturer must be consulted.
9 Start up of the chiller
CAUTION!
QUALIFIED PERSONNEL!!!
CAUTION!
DEVICE FAULT, AFTER SWITCHING OFF THE CHILLER, WAIT FOR ABOUT 30 SECONDS BEFORE TURNING IT ON
AGAIN!!!
NOTE: The following instruction will guide you through the start up procedure in detailed steps. For a
quick commissioning instruction please see appendix A.
•
Turn main switch, control switch, all circuit breakers to switches to the - 0 - (off) position.
•
CHILLER with tank: Remove filling plug, which is located in the front side / top side of the chiller (external), or on reservoir
top plate (internal).
•
Fill reservoir with water-glycol mixture until the maximum level is reached. (water quality and
established according to the application specifications)
70040-106_01-C_EN-DE-IT_comp.doc
English
WORK ON THE ELECTRICAL AND REFRIGERANT CIRCUITS MAY ONLY BE PERFORMED BY
TO AVOID AN UNDEFINED OPERATING STATUS, A FUNCTIONAL RESTRICTION, OR A
Picture 7 – Main switch OFF
Picture 9 – Example of filling point
Picture 8 – Circuit breakers OFF
12
treatment should be