Labels & Cosmetics - Grizzly G0857 Owner's Manual

To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
MODEL G0857
8" X 76" PARALLELOGRAM JOINTER
w/MOBILE BASE
Specifications WARNING!
Motor: 3 HP, 230V, Single-Phase, 60 Hz
To reduce the risk of serious injury when using this machine:
Full-Load Current: 12A
1. Read and understand owner's manual before operating.
Cutterhead: 4-Knife, 3-1/16" Dia.
2. Always wear approved eye protection and respirator.
Knife Size: 8" x 3/4" x 1/8"
3. Only plug power cord into a grounded outlet.
Replacement Knives: H4982
4. Except when rabbeting, keep all guards in place and in proper
Cutterhead Speed: 5500 RPM
operating condition. Always replace guard after rabbeting.
Cuts Per Minute: 22,000
5. Never cut workpieces smaller than 10" long and 1/2" thick.
Fence Tilt: 45º, 90º, 135º
6. Always use push blocks when face planing.
Table Size: 76" x 8"
7. Keep hands at least 4" away from cutterhead.
Min. Workpiece Length: 10"
8. Never cut deeper than 1/8" on a single pass.
Min. Workpiece Thickness: 1/2" 9. Be aware of "kickback" hazards and how to prevent them.
Max. Depth of Cut Per Pass: 1/8" 10. Turn motor OFF and disconnect power before changing blades,
Max. Rabbeting Depth: 1/2" adjusting tables/fence, or servicing.
Weight: 365 lbs. 11. Tie back long hair, roll up sleeves, and DO NOT wear loose
clothing, gloves, or jewelry.
12. Before starting, ensure tables are adjusted properly, blades are
secure, and jointer is stable.
13. Do not joint boards with cracks, loose knots, or any defects.
175370 14. DO NOT expose to rain or use in wet locations.
15. Always support workpiece against fence and table when cutting.
Date
Never attempt any operation free-handed.
16. Always feed workpiece against cutterhead rotation. Never move
workpiece backward while feeding.
S/N
17. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Grizzly in Taiwan
MODEL G0858
8" X 76" PARALLELOGRAM JOINTER
w/HELICAL CUTTERHEAD & MOBILE BASE
Specifications
WARNING!
Motor: 3 HP, 230V, Single-Phase, 60 Hz
To reduce the risk of serious injury when using this machine:
Full-Load Current: 12A
1. Read and understand owner's manual before operating.
Cutterhead: Helical w/Indexable Inserts
2. Always wear approved eye protection and respirator.
Insert Size: 15 x 15 x 2.5mm
3. Only plug power cord into a grounded outlet.
Number of Inserts: 36 4. Except when rabbeting, keep all guards in place and in proper
Replacement Inserts: H9893 operating condition. Always replace guard after rabbeting.
Cutterhead Speed: 5500 RPM 5. Never cut workpieces smaller than 10" long and 1/2" thick.
Cuts Per Minute: 22,000 6. Always use push blocks when face planing.
Fence Tilt: 45º, 90º, 135º 7. Keep hands at least 4" away from cutterhead.
Table Size: 76" x 8" 8. Never cut deeper than 1/8" on a single pass.
Min. Workpiece Length: 10" 9. Be aware of "kickback" hazards and how to prevent them.
Min. Workpiece Thickness: 1/2"
10. Turn motor OFF and disconnect power before changing inserts,
Max. Depth of Cut Per Pass: 1/8"
adjusting tables/fence, or servicing.
Max. Rabbeting Depth: 1/2"
11. Tie back long hair, roll up sleeves, and DO NOT wear loose
Weight: 365 lbs.
clothing, gloves, or jewelry.
12. Before starting, ensure tables are adjusted properly, inserts are
secure, and jointer is stable.
13. Do not joint boards with cracks, loose knots, or any defects.
14. DO NOT expose to rain or use in wet locations.
175370
15. Always support workpiece against fence and table when cutting.
Date
Never attempt any operation free-handed.
16. Always feed workpiece against cutterhead rotation. Never move
workpiece backward while feeding.
S/N
17. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Grizzly in Taiwan
REF PART # DESCRIPTION
201 P0857201 MACHINE ID LABEL (G0857)
201 P0858201 MACHINE ID LABEL (G0858)
202 P0857202 READ MANUAL LABEL
203 P0857203 CUTTERHEAD WARNING LABEL
204 P0857204 CUTTERHEAD EXPOSED LABEL
205 P0857205 ELECTRICITY LABEL
206 P0857206 DISCONNECT POWER LABEL
207 P0857207 CUTTERHEAD GUARD LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-60-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
WARNING!
202
201
210
grizzly.com
211
Cutterhead
exposed
between
these lines.
203 204
G0857
209
G0858
212
KEEP PANEL
CLOSED
WHILE
OPERATING!
REF PART #
208 P0857208
209 P0857209
209 P0858209
210 P0857210
211 P0857211
212 P0857212
213 P0857213
214 P0857214
Model G0857/G0858 (Mfd. Since 07/19)
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
203
205
206
207
DANGER!
ROTATING
CUTTERHEAD BELOW!
WARNING!
KICKBACK HAZARD!
1. Ensure outfeed table is
Use this guard for all
even with knives/inserts.
possible operations, and
2. Never exceed the
immediately reinstall it
maximum depth of cut.
following operations that
3. Do not stand directly
require its removal.
behind workpiece.
208
WARNING!
INJURY HAZARD!
To reduce risk of short
and long-term injury,
wear safety glasses,
hearing protection, and
a respirator when using
this machine.
206
205
DESCRIPTION
EYES EARS LUNGS WARNING LABEL
MODEL NUMBER LABEL (G0857)
MODEL NUMBER LABEL (G0858)
GRIZZLY.COM LABEL
GRIZZLY NAMEPLATE-SMALL
PANEL CLOSED WARNING LABEL
TOUCH-UP PAINT, GRIZZLY GREEN
TOUCH-UP PAINT, GREY PUTTY
WARNING!
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize the
possibility of operators
hands contacting the
cutterhead while cutting.
214
213