Disabling & Locking Switch - Grizzly G0857 Owner's Manual

Disabling & Locking
Switch
The switch can be disabled and locked by insert-
ing a padlock through the ON/START button, as
shown. Locking the switch in this manner can
prevent unauthorized operation of the machine,
which is especially important if the machine is not
stored inside an access-restricted building.
IMPORTANT: Locking the switch with a padlock
only restricts its function. It is not a substitute
for disconnecting power from the machine when
adjusting or servicing.
Shaft
ON / START
Button
OFF / STOP
Paddle
Figure 16. Switch disabled by a padlock.
-24-
Padlock
Children or untrained people can be
seriously injured by this machine. This
risk increases with unsupervised operation.
To help prevent unsupervised operation,
disable and lock the switch before leaving
machine unattended! Place key in a well-
hidden or secure location.
NOTICE
The padlock shaft diameter is important to
the disabling function of the switch. Use
padlocks with a maximum shaft diameter
of 4mm. With any padlock used to lock the
switch, test the switch after installation to
ensure that it is properly disabled.
Model G0857/G0858 (Mfd. Since 07/19)