Operation - Kärcher WD 1 Manual

Cable hook
Illustration
See page 37.
 To store the mains cable.
Supply Cord
Crevice nozzle
For edges, joints, heaters and hard to reach
locations.
Foam filter
Illustration
 Pull a foam filter over the filter basket for
wet vacuum cleaning.
Note: Ensure firm seating of the foam filter.
Cartridge filter
(depending on model)
Illustration
 Use cartridge filter for vacuuming up
coarse soiling.
Filter bag
(depending on model)
Illustration
 Use filter bag for vacuuming up coarse
soiling.
Note: When installing the filter bag, ensure
that no unfiltered air can be sucked through
the filter basket.
Filter bag
Illustration
Illustration
Note: Do not use a filter bag for wet vacu-
uming!
 Recommendation: To vacuum fine
dust, use the filter bag.
Vacuumed up dust can be more easily
disposed of with the filter bag.
Caution
Always work with the inserted
foam filter during wet vacuum
cleaning.
Always work with the inserted fil-
ter bag or cartridge filter during
dry vacuum cleaning.
Before Startup
Illustration
 Mount loose parts delivered with appli-
ance prior to start-up.
Illustration
 Connect accessories.
Illustration
 Plug in the main plug.
Illustration
 Turn on the machine.
Dry vacuum cleaning
Caution
Check the filter for damage prior
to installation and replace as
necessary.
Illustration
 Recommendation: To vacuum fine
dust, use the filter bag.
Information filter bag
The filling level of the filter bag depends
–
on the dirt that is sucked in.
The filter bag needs to be replaced
–
more frequently while sucking in fine
dust, sand, etc.
Clogged filter bags can burst - therefore
–
make sure to replace the filter bag in a
timely manner!
Caution
Vacuum cold ashes only when
using a pre-filter.
Order no. basic design: 2.863-139.0, pre-
mium design: 2.863-161.0.
– 8
EN

Operation

Start up
13