Dimensional Drawings I Frost Filter Install - ADJ MOD STQ User Instructions

MOD STQ
*NOT TO SCALE
MOD STQ
The MOD STQ comes with 3 interchangeable frost filters. The degree of the individual filters is
stamped into the corner of each filter. To install the frost filter unscrew the four thumb screws holding
the lens in place. Remove the lens and install the filter inside the unit. Line up the thumb screw holes
on the edges of filter with screw holes of the unit. Screw the thumb screws back into place securing
the frost filter and lens. For help contact ADJ Customer Support.
ADJ Products, LLC - www.adj.com - MOD STQ User Manual Page 21
7.75" / 197mm
5.5" / 140mm
4.17" / 106mm
Dimensional Drawing
7.4" / 187.8mm
Frost Filter Install