ADJ MOD STQ User Instructions page 18

Table of Contents

Advertisement

MOD STQ
DMX MODE - The submenus listed under DMX MODE are as follows: ADDR (Address), CHAN
(Channel Mode), and NO (No DMX Status).
- ADDR - In this submenu you are able to find and set your desired DMX address.
- CHAN - In this submenu you are able to find and set your desired DMX channel mode.
- NO - This setting is used as a precaution mode in case the DMX signal is lost or interrupted.
The operating mode chosen is the running mode the fixture will go into when the DMX signal is lost.
Listed below are the 3 modes.
• HOLD - This setting will have the fixture stay in the last DMX setup.
• BLACK - This setting will have the fixture automatically go into blackout mode.
• PROG - This setting will have the fixture automatically run 1 of 17 (0-16) internal programs.
PERSON (PERSONALITY) - The submenus listed under PERSON (PERSONALITY) are as follows:
MAST (Master), SLAV (Slave), Dim Mode, LED Refresh Rate (LEDRfrsh), Gamma, Display, and
Service.
- MAST (Master) - Set the unit to act as the Master unit in a master-slave set up.
- SLAV (Slave) - Set the unit to act as the slave unit in a master-slave set up.
- Dimming Modes & Dimming Speed Setttings - In this submenu you are able to set your desired
dimmer mode or dimming speed.
- LED Refresh Rate Setting - In this submenu you are able to set your desired LED refresh rate.
- GMA (Gamma) - In this submenu you are able to set your desired gamma brightness.
- BACK (Display Blackout) - In this submenu you you are able to adjust and set the display backlight
blackout time.
- LOCK (Display Lock) - In this submenu you are able to adjust the display/system lock time.
- CALI (Calibration Adjustment) - In this submenu you you are able to adjust the calibration settings.
- REST (Factory Settings) - In this submenu you are able to reset the unit to its factory/default settings.
MANUAL - This submenu is for manual control and testing.
INTPROGS (INTERNAL PROGRAMS) - This menu allows you to select 1 of 16 (0-16) internal programs
to run. The internal program speed and fade speeds are adjustable. The internal programs can also
be run as sound active.
ADJ Products, LLC - www.adj.com - MOD STQ User Manual Page 17
System Menu

Advertisement

Table of Contents
loading

Table of Contents