Advertisement
Assembling
5.6 Installation of modular devices
3. Fit the connectors for the signaling contact.
4. Insert the terminal blocks into the sockets on the IE Switch X-300.
Note
For more exact dimensions, please refer to the section "Dimension drawings".
Note
The wall mounting must be capable of supporting at least four times the weight of the
IE Switch X-300.
Note
For wall mounting of a rack device (R), use suitable fittings and mount the device as shown
in the drawing.
5.6
Installation of modular devices
5.6.1
Installation and removal of media modules
Safety notices
NOTICE
Use only approved media modules
If you use media modules that are not approved by Siemens AG, there is no guarantee that
the device will function according to the specification.
If you use unapproved media modules, this can lead to the following problems:
● Damage to the device
● Loss of the approvals
● Violation of the EMC regulations
Use only approved media modules.
NOTICE
Damage due to changing modules while the device is turned on
Media modules for SCALANCE devices are not capable of hot plugging.
Install or remove media modules only when the power supply of the device is turned off.
36
Compact Operating Instructions, 11/2019, A5E02630810-13
SCALANCE X-300M PoE
Advertisement
