Engine Mount Arm Assembly Installation; Engine/Blower/Blade Assembly Installation - Peco Classic Series Operator's Manual

2-2 Engine Mount Arm Assembly
Installation
Insert the Engine Mount Arm Assembly P#(A1916) into
the Outer Engine Mount Tube and secure using (1)
Detent Pin P#(J0248). Refer to Figure 2-2.
Figure 2-2
Engine Mount
Arm Assembly
Detent
Pin
2-3 Engine/Blower/Blade/Assembly
Installation
Position the Engine/Blower/Blade Assembly P#(A639)
on top of the Engine Mount Arm Assembly as shown in
Figure 2-2, and secure using (4) 5/16"-18 x 1-1/2" HHCS
P#(K1157) and (4) 5/16"-18 Ny-Flange Locknuts
P#(K2516).
(4) 5/16"-18 x1-1/2" HHCS
(4) 5/16"-18 Locknuts
Engine/Blower
Blade Assembly
7