Brake Cartridge; How To Change Brake - SawStop JSS-120A60 Owner's Manual

BRAKE CARTRIDGE

HOW TO CHANGE BRAKE

|
34
®
SawStop Jobsite Saw Pro
Always switch the power off and
unplug the power cord before
changing the brake .
Switch power off and unplug the power cord.
1
Raise blade fully and set blade tilt to zero
degrees. Remove table insert. Remove the
blade.
Turn brake key 1/4 turn clockwise and pull
2
out.
Pull brake off pins.
3
Slide new brake onto both pins. Insert key
4
and rotate 1/4 turn counter-clockwise to lock
in place. Reinstall riving knife/blade guard
and table insert.